How to clean Honeywell fan: Simple act to improve life quality
It is a common thing for people to leave their fans covered with dust. And not many can aware that a dusty fan is one of the main reasons why people catch lung diseases.
For some, disassembling and cleaning a fan is extremely hard, only pro engineer could manage it. Little did they know, the work is incredibly simple, even a child can do it.
A dust-free Honeywell fan is a crucial element to maintain a healthy life. Cleaning the fan frequently can also extend the Honeywell fan’s life expectancy, making it long lasting.
In this article, TopCoupons.deals will walk you through the process of how to clean Honeywell fan. Now let’s dive in together, shall we?
How to clean honeywell fan
1. Assemble the necessaries
Before you start, we highly recommend you to gather all the tools that you will need for the work. Here are the list of the required tools:
– A set of screwdrivers
– A compressed air can
– Some clean soft cloths or rugs, or just pieces of fabric would do
– A vacuum cleaner or a blower
– A brush or a pipe cleaner
– A face mask
2. Begin the process
– Unplug and start cleaning:
Firstly, unplug the fan. You don’t want to mess with the fan, or any electric device while it is plug in. After that, grab the vacuum cleaner to get rid of the dust. Or you can use a blower to blow it off. However, remember to wear a face mask to prevent you from inhaling all the dust that is flying all around.
After cleaning with a vacuum or a blower, grab a brush pipe cleaner to clean between the grille of the fan.
– Unscrew the grille:
Once you have done with the grille, get a screwdriver and remove the screws that are attaching to the fan. Make sure that you have unplugged the fan, or it could cost you a finger.
Even when you have unplugged the fan, you still need to be careful since the fan’s blades can be quite sharp. You can wear a pair of gloves for extra precaution.
– How to clean Honeywell fan with soap and water:
Get a round basin or a big pot, pour in the water and soap, any soap will do, even for dish soap. Mix it up until it is bubbling up. Then use the clean cloth, soak into the mixture and clean the Honeywell fan’s blades.
After removing all the dust on the fan, rinse it with clean water and then repeat with the rest. After a while, check for the mixture, if it turns black and dirty, you should dump it out and make a new one.
– Wipe it dry:
After you have finished with all the blades, get a clean and dry piece of cloth to wipe the blades dry. This should remove every last bit of dust that still cling on the blades.
And voila, you have a clean fan. Now, the only thing left is to assemble the Honeywell fan.
– Honeywell Fan, Assemble:
Just simply placing everything back to where they were. Put the grille on, screw it in and you are done. Plug the fan in, turn it on for a little while to make sure you have done it right, and you are good to go.
Here is the information about how to clean Honeywell fan. It is certainly annoying to have a dusty fan blowing all the dust around in your house. We hope that through this article, you have understood more about how to clean Honeywell fan. For now, thank you so much for reading. We hope you have a great day!!!